I. Common Opening Methods
1. Metal Cans (Pry-Opening Method): Insert a flathead screwdriver into the groove on the edge of the lid and pry evenly around the edges, avoiding applying force on one side to prevent deformation.
If it still doesn't open, tap the edge of the lid at an angle with a nail, pry up the edge, and then use pliers to pull it open.
For sealed lids, use a screwdriver to gently pry from multiple angles, gradually separating the lid.
2. Plastic Cans (Slice-Opening or Pull-Ring Method): Slice along the dotted line on the can with scissors to the bottom, then pry it open with both hands.
For plastic cans with pull rings, simply pull the ring.
3. Heating Method (Suitable for Cans with Tight Seals): Pour hot water (around 60℃) over the edge of the lid. Thermal expansion and contraction will make it easier to open, preventing high temperatures from affecting the paint quality.
II. Safety Precautions
1. Environment and Tools: Ensure good ventilation and use tools free of oil and rust (such as screwdrivers). 2. Personal Protective Equipment: Wear gloves and goggles to prevent paint splattering or skin contact.
3. Operating Techniques: Slowly turn the screw cap counterclockwise. For sealed caps, gently pry open the edge first.
After opening, allow the pressure to release to avoid splashing.
4. Special Paint Types: Water-based paints should be used as soon as possible after opening to prevent water evaporation.
Oil-based paints require careful sealing. Metallic paints need to be protected from impurities.
III. Recommended Tools
1. Professional Can Opener: Insert the hook end into the lid rim, press down at a 45-degree angle, and move the handle along the can opening to open it completely without damaging the lid.
2. Flathead Screwdriver: A long-handled screwdriver requires less effort; insert it into the lid rim, press down, and rotate one full turn.
IV. General Principles
1. Keep hands dry to avoid slipping.
2. For cans that have not been opened for a long time, soak the lid rim in hot water before attempting to open. 3. Do not damage the rubber sealing ring, otherwise it will affect the sealing next time.

