What are the environmental requirements for Round Metal Pail storage?

1. Storage site requirements
The storage site for Round Metal Pail should be solid and flat, 0.2 meters higher than the surrounding ground, and have a drainage slope of 0.005.
Drainage and water-sealed oil-isolating facilities should be set up around to prevent the spread of chemicals when they leak.
2. Ventilation and air quality
The storage area should be well ventilated to ensure that the air quality meets relevant national standards.
3. Temperature and humidity control
The storage environment should avoid direct sunlight to prevent high temperature from causing chemicals to volatilize or react.
For some chemicals, the temperature and humidity of the storage environment need to be controlled according to their properties.
4. Safety and protection measures
Obvious safety signs should be set up in the storage area in accordance with the provisions of the "Safety Signs and Their Use Guidelines".
Smoking and using open flames are strictly prohibited in the storage area, and a complete electrical safety management system needs to be established.
For flammable, explosive or toxic chemicals, anti-static and lightning protection measures need to be taken in the storage area.
5. Packaging and leakage prevention
Round Metal Pail should be checked regularly to ensure good sealing and no leakage.
If the packaging is found to be damaged or deformed, it should be repaired or replaced in time, stored separately and disposal measures should be formulated.
6. Emergency preparation
The storage area should be equipped with emergency equipment, such as fire extinguishers, leak emergency treatment tools, etc.
In the event of a leak, the emergency plan should be activated immediately to isolate the contaminated area.
7. Other requirements
The storage area should be kept clean and free of debris to avoid contamination of chemicals.
For chemicals such as volatile organic compounds (VOCs), closed measures should be taken during storage to prevent gas leakage.